Post Machines Wanted - Charts  - Contact Us 
Home | Gallery | New Machines | Used Machines | Parts/Tooling | Leasing | Service | Advertising
Inquire & Order Parts
Iron Worker Punches & Dies Inquiry
Shear Blades Inquiry

Boschert - 10-ga to 1/4" Hydraulic Notchers, ID#BOSNTCR

The EAGLE and EAGLE 250 Hydraulic Power Notcher   

Standard Features of The Eagle and Eagle 250 -

  • 1/4" mild steel capacity
  • 3/16" stainless steel capacity
  • 8-7/8" x 8-7/8" 90° notch
  • Front to back cutting to hold material against stop
  • Milled bed surface for no float or stick operation
  • 35" wide by 25" deep table with milled surface so material does not float or stick
  • Front to back cutting
  • Hi-Carbon, Hi-Chrome blades
  • Internal stop for shearing
  • Two patented 12" combination horizontal hold down and stop bars
  • Engraved brass scales
  • Moveable electric foot pedal
  • Adjustable stroke, 50 per minute
  • Solid state circuitry
  • Jog, single or continuous mode
  • 6.5 horsepower motor
  • Scrap bucket

The Eagle 250 Has These Additional features:

  • Two material hold downs
  • Special blade guard

BOSCHERT Patented Quality -

The patented Boschert TRI-GIDE™ system gives all Boschert notching machines the greatest accuracy and durability of any notcher made today.

TRI is for the three large guiding cylinders. Two cylinders are in the top of the machine, close to the blades, the third is in the base and fully integrated with the hydraulic piston.

GIDE is for the precise vertical travel of the ram. Torque from cutting heavy material is distributed evenly to all three cylinders.

TRI-GIDE™ Eliminates -

  • Blade clearance adjustment for different material thicknesses
  • Frequent blade sharpening due to sloppy guiding
  • Uneven wear, and replacement problems with traditional guiding systems

Exclusive TRI-GIDE™ Benefits -

  • Long blade life due to precise, rigid ram guiding
  • Burr-free cuts on all gauges (within capacity)
  • Off-center loading – 1" x 6" notch is no problem

TRI-GIDE™ is just part of the overall quality and ingenuity that goes into every Boschert Notcher. Other features include:

  • Front-to-Back cutting - holds material against stops
  • Milled table surface – keeps material from sticking
  • Hi-Carbon Hi-chrome Blades – overlap on the cutting tip to eliminate blade chipping
  • Thousands of machines installed in North America
  • Parts for all machines ever built are available

Eagle 250 (Holddowns & Guard)

Patented Combination Horizontal
Hold-down and Stop Bar

Many notcher and punches to choose from, call us with your exact requirements and we'll quote you a notcher to fit your need. Call us toll free at 800-753-0393 or email us. Boschert has many combinations of notchers with punching and variable notch patterns as well.

Please Fill Out the Following Information
Fax me a quote.
Send literature.
Please have a salesman call.
State: Zip:
WWW Address:

Home | Gallery | New Machines | Used Machines | Parts/Tooling | Leasing | Service | Advertising
Copyright © 2007-2019 Three Rivers Machinery. All rights reserved.
Three Rivers Machinery -- 1079 East Windhaven Road -- Pittsburgh, PA 15205 -- Map
Phone (412) 921-2800 7AM-5PM EST -- 24/7 Fax (412) 921-2801 --